Asphalt Recolouring
ASH COLOUR 10 Litre
Revitalise your driveway and path surfaces with ASH COLOUR, a water-based, low-solids coating designed to penetrate and recolour asphalt. This innovative solution provides a uniform, low-sheen finish, enhancing the appearance of older, grey surfaces and masking repair work.
IDEAL FOR USE ON: Old, grey driveways and path surfaces - Asphalt surfaces requiring a uniform finish - Areas needing concealment of repair work
ASH COLOUR's advanced formula not only improves aesthetics but also extends the life of asphalt by offering initial protection against most spills, including oil.
Refer to our Tech Data sheet for more detailed information
-
Water-based, low-solids coating
-
Penetrates and recolours asphalt
-
Provides a uniform appearance for remedial work
-
Low sheen finish
-
Available in Black
-
Available in test pots and sizes 4 & 10 litres
Revitalise your driveway with ASH COLOUR
APPLICATION INSTRUCTIONS:
-
Wear suitable protective gear including eye protection, overalls, footwear, and waterproof gloves.
-
Apply on a fine day, avoiding conditions below 10°C, humidity above 85%, or imminent dew/rainfall within 3 hours.
-
Use a brush, 22 mm long nap roller, or airless spray.
-
First Coat: Thin 50:50 with clean water for penetration.
-
Second Coat: Apply as supplied.
-
For heavy traffic areas, apply three coats for enhanced durability.
-
Apply in small sections to ensure an even finish. Mist surface with clean water if drying too quickly.
DRY TIME:
-
Touch Dry: 30 minutes
-
Recoat: 2 hours
-
Ready for foot traffic: Overnight
-
Ready for vehicle traffic: 48 hours at least
-
Change to this
-
Foot traffic: Overnight
-
Vehicle traffic: at least 48 hours
AVAILABLE SIZES:
-
Test Pots
-
4 litres
-
10 litres
Always test a small area first to ensure ASHCOLOUR gives the desired result on your specific surface. Note that the wet colour will darken once dry.
Colour Available:
