Why PREP ETCH is the Best and Green Choice for Preparing Concrete

#EcoFriendlyDIY #ConcretePrep #SafeEtching #Mastermax #SustainablePainting

MASTERMAX PREP ETCH

When it comes to painting or sealing concrete, proper surface preparation is key to achieving a strong, long-lasting finish. That’s where MASTERMAX PREP ETCH comes in. It’s a safe, effective, and environmentally friendly way to prepare your concrete surfaces for optimal adhesion—without the harsh chemicals found in traditional acid etches.

Why Use PREP ETCH?

Safe & Eco-Friendly – Unlike harsh acids, PREP ETCH is non-toxic, low-odour, and safe to use near plants and grass. It won’t harm the environment, making it the perfect choice for sustainable DIY projects.
Better Adhesion – Helps roughen the concrete surface, ensuring paint or sealer bonds properly.
Low Odour – No strong chemical smells, making it easier and safer to use.
Versatile – Works on driveways, garage floors, concrete steps, and pathways.
Easy to Use – Simply mix with water and apply.

How to Use PREP ETCH

Prepare the Surface – Sweep away loose dirt and debris. If there’s oil, use a degreaser first.
Mix the Solution – Dissolve 1kg of PREP ETCH in 5 litres of water.
Apply Evenly – Pour the solution onto the surface using a plastic watering can. Make sure the surface stays wet.
Wait & Scrub – Allow 5-15 minutes for bubbling to occur, then scrub with a stiff broom.
Rinse Thoroughly – Wash off with clean water while scrubbing to remove residue.
Check the Surface – The concrete should have a texture similar to medium-grit sandpaper. If needed, repeat the process.

Important Tips

Do not use on previously coated concrete.
Allow new concrete to cure for 28 days before etching.
Always rinse thoroughly to prevent adhesion issues.

By choosing MASTERMAX PREP ETCH, you’re not only ensuring a strong, long-lasting bond for your coatings but also making an environmentally responsible choice that keeps your outdoor spaces safe for your family, pets, and plants.