Road Marking Paint
ROAD MAKING PAINT
A high-performance, water-based acrylic road and line marking paint designed for quick drying, excellent adhesion, and superior wear resistance on bitumen and concrete surfaces. Available in two colours Yellow and White.
IDEAL FOR USE ON: roads, parking lots, factory floor lines, and other high-traffic areas where durable, long-lasting paint is essential.
Colours:
White
Yellow
Sizes:
1 Litre
4 Litre
10 Litre
Surface Preparation:
-
Ensure surfaces are clean, dry, and free from oil, grease, lichen, or any loose material before application.
-
Can be applied directly to bare, unprimed, or unsealed surfaces.
Application Guidelines:
-
Stir thoroughly before use.
-
Recommended method: Apply by spray (preferably airless) for best results.
Thin up to 5% by volume with water if needed. -
Brush application is possible but challenging due to fast drying. Thinning slightly with water can slow drying, but a thick layer is still essential.
-
First Coat: For semi-new or aged surfaces like car parks or tennis courts, apply a dust coat of approx. 50 microns DFT, leave for at least 24 hours, then apply a second coat to the desired thickness.
Product Availability:
Sizes: 4 Litre, 20 Litre, 200 Litre
Colours: White, Yellow
Technical Specifications:
Resin System: Acrylic Emulsion
Pigmentation: Titanium Dioxide, Organic Pigments
Finish: Matt
Coverage: 2.2–3.6 m² per litre at 180–220 microns DFT
Drying Time: 15 minutes minimum at 25°C (allow longer in cool or humid conditions)
Health & Safety:
Refer to the Material Safety Data Sheet for full details.
Ensure adequate ventilation during use. Avoid breathing vapour.
Wear eye protection; seek medical attention if eyes are splashed.
Additional Information: This product meets NZTA M/7 specifications for rapid drying and durability. For more detailed technical information, please refer to the full Technical Data Sheet.